→Used in mechanical properties test for various wood-based panels, including: plywood, particle board, fibreboard, OSB(oriented structural board),cement-bonded particleboard, multi-ply parquets, bamboo flooring, MDF,decorative veneered wood-based panels, resin impregnated paper overlaid wood-based panels, laminated flooring.
→Used in 3-point bending test and 4-point bending tests for super long specimen.
→Used for surface gluing strength, surface bonding strength, internal bonding strength, nail withdrawal force, static bending strength, elastic modulus, glue-line shear strength tests.
→Comply with standards: AS/NZS4357.2, AS/NZS4063.1, AS/NZS2269, AS/NZS1577.
Tests
→Determination of static bending strength and elastic modulus for 1m-12m long wood-based panels sample (3-point bending test)
→ Determination of static bending strength and elastic modulus for 1m-12m long wood-based panels sample (4-point bending test)
→ Long wood sample bending load
→ Wood-based panel bending performance, bending load, initial bending load, final bending load, bending strength, positive bending, negative bending, bending elastic modulus
→ Total peeling rate, maximum peeling rate, wood breakage rate, characteristic strength of wood-based panels
→ Wood-based panel inner bonding strength test
→Wood-based board surface bonding strength determination method 1: suitable for unfinished particleboard, fiberboard, cement particleboard, non-veneer veneer wood-based board
→ Wood-based panel surface bonding strength determination method 2: suitable for veneer veneer wood-based panel;
→Wood-based panel glue line shear strength determination: shear failure occurs on the glue line through the compression load, the specimen adhesive layer shear failure, load loading speed of 9800N/min
→Wood-based panel peeling force determination: suitable for PVC film veneer wood-based panel, tensile speed 588N/min
→Wood-based panel withdraw force of screw determination
→Wood-based panel tensile strength determination, compression strength determination, compression strength determination of parallel to grain (ratio of compression load and cross-sectional area parallel to grain)
