Application
→It can be used for 3-point flexural test for gypsum block, which is used for non-load-bearing internal partitions of buildings.
→It can be complete flexure strength test and research for other materials.
→Comply with test standard JC/T698 Gypsum Block
→Max. Load capacity: 20kN
→Measuring range of load: 2%-100%
→Load resolution: 1/±200000F.S
→Loading rate:20N/s
→Span of lower flexure support: 500mm
→Crosshead stroke: 1000mm
→Span between columns: 400mm
→Working voltage: 1 phase, 220VAC±10% 50Hz