→Stainless steel fruit knife Tensile Torsion Testing Machine
→Used for strength test of forks, spoons, soup ladle and dull knives: place the specimen on the horizontal plane, keep the highest point of handle neck up and apply 7N load every one centimeter or apply 100N load regardless of length and hold for 10s and then measure the permanenet deformation at workingpoint.
→Used for connection firmness test of nonmetal handle excluding metal handle and ceramics and also for tensile test: hold for 10s at 180N or 90N.
→tensile and torsion test, conducted on KFTT-10 tensile and torsion testing machine
→tension and torsion are made in turn on the same specimen
→torsion test: as for superficial area of handle less than 37cm2,torque 3.7N.m, hold time for 10s; as for superficial area of handle not less than 37cm2,torque 4.5N.m, hold time for 10s.
Standards
→GB/T15067.2 Stainless steel Cutlery
→GB/T30769-2014 Stainless steel fruit knife
→GB/T15067.1 Stainless steel Cutlery
→GB9684 Hygienic standard for stainless steel food containers and table wares
→ISO8441/8442 Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery
→BS EN ISO8442-1 Materials and articles in contact with foodstuffs-Cutlery and table hollowware-part 1: Requirements for cutlery for the preparation of food
Specifications
→max.torque 10N.m
→max.tension 90N/180N
→torque test 3.7N.m/4.5N.m
Product Expansion
→TTM10 tensile and torsion testing machine with torsion load 10N.m-200N.m
→TTM20 tensile and torsion testing machine with torsion load 10N.m-200N.m
→TTM50 tensile and torsion testing machine with torsion load 10N.m-200N.m
→TTM100 tensile and torsion testing machine with torsion load 10N.m-200N.m
→TTM200 tensile and torsion testing machine with torsion load 10N.m-200N.m
→TTM300 tensile and torsion testing machine with torsion load 10N.m-200N.m