→10kN anti-glare board testing machine is designed and manufactured according to GB/T24718, used to test anti-glare board with height 700mm -1100mm, width 80mm-250mm.
→Fix the anti-glare board on test platform and clamp its middle part with standard clamps. And apply the traction load to the anti-glare board at the speed of 100 mm/min, with the center of the standard fixture as traction point, traction direction perpendicular to the anti-glare board, until the surface of anti-glare board ruptures or it reaches the maximum load. The maximum traction load is taken as the load F. A total of 3 groups of tests were conducted and the mean value of the results of 3 tests is taken as the test results.
→The anti-deformation R adopts laser projection to test the initial projection displacement and the final projection displacement, which can be directly read, accurate and reliable.
→The wind load F of anti-glare board should not be larger than the product of C and S, wind load constant C= 1647.5N /m2, S is the effective wind bearing area of anti-glare board.
→ T-type test bench, standard clamp of wind load, adjustable height traction device.
→ with rigid pulley, steel wire for traction rope, adjustable height sliding device.
→ anti-deformation R elevation laser projection test, direct reading, accurate and reliable;
→ streamline loading frame with high rigidity, high stability and no vibration impact, 1.5 ~ 2.0 times of test load stiffness.
→ traction speed 0.001 - 600mm/min (1m/min - 25m/min high-speed test system can be customized).
→ built-in all-digital closed-loop, multi-channel, multi-function, easy to control hrj-test anti-dazzle plate mechanical performance Test software/English version can be customized. Various standard methods (GB, GJB, ISO, JIS, ASTM, DIN, BS, NF, EN, AS, NBR, IEC, GOST, CNS, APA).