600kN/1000kN Electro-hydraulic Servo Concrete Drainage Pipes Compression Testing Machine

锘?

DETAIL

→600kN Concrete Drainage Pipes Compression Testing Machine；

→600kN/1000kN Reinforced Concrete Drainage Pipes Compression Testing Machine；

→600kN Concrete Drainage Pipes Compression Testing Machine (Servo Control)

→600kN/1000kN Steel Reinforced Concrete Drainage Pipes Compression Testing Machine (Servo Control)

Introduction

→600kN/1000kN concrete drainage pipes compression testing machine is used in crack load and break test by 3-point loading method for concrete drainage pipes.

→600kN concrete drainage pipes compression testing machine is used in compress test for pipes with ID 100mm-600mm.

→1000kN concrete drainage pipes compression testing machine is used in compress test for pipes with ID 200mm-2000mm.

→It can be used in compression test for pipes with ID 2200mm-3500mm.

→Used for rainwater pipes, sewage pipes, farm irrigation pipes, gravity flow pipes, slotting and jacking construction pipes and other pipes for other application, and also for some pipes produced by adopting centrifuge, vertical extrusion and other technology.

→Adopting precise automatic control and data acquisition system to realize digitalization adjustment of data acquisition and control process.

→Expansion function: it also can be used for compression test for pipes made of metals, nonmetals and composites and air vent pipes and smoke vent pipes.

Test Standards

→ASTM C497-2015 Standard Test Methods For Concrete Pipe, Manhole Sections or Tile；

→JIS A 5371-2010 Precast unreinforced concrete products；

→JIS A 5372-2010 Precast reinforced concrete products；

→BS 5911-1Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints(comnplementary to BSEN 1916:2002)

Technical Specifications

YAW-P600kN/1000kN Reinforced Concrete Drainage Pipes Compression Testing Machine
1	Max, load	600kN	1000kN
2	Relative error of indicating value of load	≤±1%
3	Measuring range of load	1%～100%F.S
4	Load resolution	1/±200000F.S
5	Loading rate	0.02%～2%FS/s
6	Moving speed of piston	≥100mm/min
7	Piston stroke	0～500mm	0～200mm
8	Test span	≥1200mm	≥2200mm
9	Distance between upper and lower bearing beams	≥1200mm	≥2450mm
10	Upper bearing beam/I-shaped beam	≥1000x52mm	≥2000x150mm
11	Lower bearing beam/square wood	Width≥50mm，Thickness≥25mm，R=12.5mm
12	Adjusting mode of test space	piston movement	movement of crosshead driven by motor
13	Loading frame	Upper-loaded cylinder, large span, high stiffness, high stability, no vibration
14	Power voltage	380VAD±10% 50Hz